DYNACORD´s COBRA-TOP is a 3-Way cabinet for use in compact line arrays and other demanding applications where wide horizontal coverage, extremely low distortion and a low sensitivity against acoustic feedback are mandatory.

The mid-range of the COBRA-TOP uses selected DYNACORD C8 cone transducers in a line array configuration. The C8 transducers show significantly lower distortion than typical horn/compression driver combinations. Therefore an extremely natural sound quality over large distances can be achieved. For the high frequencies of the COBRA-TOP an Electro-Voice DH2T titanium diaphragm driver and a HPT94 constant directivity horn are used in order to prevent any set-up and adjustment problems for the main direction and the near field. The DYNACORD COBRA-TOP uses a dual vented direct-radiator design equipped with an Electro-Voice EVX 155 for the low frequencies. For Near-Fill and Side-Fill applications and for the reinforcement of speech the COBRA-TOP cabinets can be used fullrange without any problems.

The cabinet is equipped with an electronic circuit called VOICE COIL TRACKING PROTECTION. This circuit senses the terminal voltage of the transducers and simulates the thermal behaviour of the transducer voice coils. In case of potential thermal overload the power applied to the speakers is reduced to a safe level. Power amps up to 1200W/8Ohms can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. The VOICE COIL TRACKING PROTECTION exhibits “soft” switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperatures have reached a safe value.

Cabinet MID – HIGH Cabinet
Cabinet type Passive 3-way
Impedance 8 Ohms
Rated power RMS 600 W
Program power 1200 W
SPL 1W / 1m 100 dB
Max. SPL 1m 131 dB
Frequency range ( -10dB ) 50Hz – 15kHz
Disp. Angle 1 kHz -6dB H 120° x V 30°
Disp. Angle 10kHz -6dB H 90° x V 40°
Int. Passive Crossover 700Hz – 4kHz
Rec. Active Crossover 124Hz
Voice coil tracking protection LOW – MID – HIGH
Components HIGH DH 2T / HPT 94
Order No. 355 391 / 357 979
Components MID C8 Line array
Order No. 4x 361 376
Components LOW EVX 155
Order No. 359 561
Connectors FR 4-pole 1+/1-
Connectors LO – MID – HIGH 4-pole 2+/2- (SYSTEM)
Connections Speakon 2x NL4 MPR
Dimensions mm (WxHxD) 600 x 495 x 717
Shipping weight 65 kg
Weight 60 kg
Cabinet 18mm
Style Birch plywood
Outfit Black
Coating Polyurethane
Steel grille Powder coated
Handles 2 pcs.
Ancra Tracks 4 pcs.
Webbing strap point 2 pcs.
Front cover 1 pcs.
Castors 4x 100mm
Warranty 36 Month