/
/
/
/
/
Dynacord PSD 215

Dynacord PSD 215

Dynacord PSD 215

Aktivni subfoofer 15″ sa pojačalom za 2-way sistem , 2 x1000 W RMS Class-D pojačalo , 24‑bit 1‑in‑3 DSP controller

- DSP unapred podešene vrednosti za DINACORD zvučnike punog opsega
- 2 x1000 W RMS Class-D pojačalo
- 24‑bit 1‑in‑3 DSP controller

3,400.00

15″ Powered Subwoofer for 2-way active loudspeaker systems 128 dB max. SPL
DSP presets for DYNACORD fullrange speakers
2 x 1000 W RMS Class-D Amplifier
Line In, Line Thru, TOP out, SUB out, DSP out for delay lines, front fills
Integrated Graphic EQ and signal generator
24 bit one-into-three DSP controller

The PSD 215 are high‑performance powered subwoofers designed to simplify creating active 2‑way systems. They use an integrated 2‑channel digital power amplifier with internal 24‑bit 1‑in‑3 DSP controller to optimize the sound quality and protect the subwoofer and full range system used with it. Examples for such systems are combinations of PSD subwoofers with full‑range D‑Lite, Corus and VariLine and the new TS 400 array cabinet.

The DYNACORD PSD 215 is equipped with an integrated two-channel Class D power amplifier (2 x 1000 watts RMS into 4 ohms) and 24-bit one-into-three DSP controller with 48-bit double precision internal resolution, eliminating the need for external controllers and power amplifiers.
The PSD 215 is equipped with a 15“ Electro-Voice DVX3159 woofer specially developed for use in compact subwoofers. It sets a new standard for minimum size and maximum acoustic output while maintaining impressive deep bass high sound pressure levels.
The DYNACORD PSE 215 is the passive versions of the PSD sub sharing the same dimensions, transducer configuration, and acoustic characteristics as the PSD 215.

Cabinet Powered Subwoofer – 1 x 15″ vented design
Maximum Amplifier Output Capability – 3200 W
Amplifier Power RMS – 2 x 1000 W
Amplifier Output TOP SPEAKER – 1000 W @ 4 Ω
Amplifier Output EXTERNAL SUB – 500 W @ 8 Ω
Output Stage Topology, amplifier – Class D
Signal/Noise-Ratio power amplifier, A-weighted – 101 dB
DIM 30 power amplifier, 3.15 kHz, 15 kHz – < 0.05%
IMD-SMPTE power amplifier, 60 Hz, 7 kHz – < 0.15%
Max. SPL 1 m / calc. – 128 dB
Frequency Range (-10 dB) – 40 Hz to X-Over
Input Level – +8 dBu
Input Impedance – 20 ㏀
Presets – 20 factory presets, 5 user memories
Display – 128 x 64 pixels, OLED
Sub Transducer – DVX-3159A
Power Requirement – 100 to 240 V AC, 50 to 60 Hz, 5.2 to 2.7 A
Operating Temperature Range – 0 °C to 40 °C
Amplifier – Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF
Switching Mode Power Supply – Inrush Current Limiters, Mains Over/ Undervoltage, Mains Overcurrent, High Temperature
Dimensions (W x H x D) – 640 mm x 465 mm x 694 mm
Net Weight – 39.6 kg
Shipping Weight – 43.6kg
Enclosure material – 15 mm Multi-ply wood
Finish – Black, scratch-proof
Grille – Steel, black finish
Wheels – 4
Handles – 2
Thread plate for distance piece – M20

Specifikacija
SERIJA: Dynacord - PSD
FREKVENTNI OPSEG (-10 dB): 40 Hz
DSP (digitalni signal procesor): Da
Maksimalni SPL: 128 dB
SNAGA POJACALA: 3200 W
Pokrivanje (H° x V°): 90 x 90
Niskotonac (bas): 15"
TRS ulaz: 1
MATERIJAL KUTIJE: Plywood
BOJA: Crna
NAPAJANJE: 100 to 240 V AC, 50 to 60 Hz, 5.2 to 2.7 A
VISINA (H): 465 mm
SIRINA (W): 640 mm
DUBINA (D): 694 mm
NETO TEZINA: 39.6 Kg
TRANSPORTNA TEZINA: 43.6 Kg
Opis proizvoda

15″ Powered Subwoofer for 2-way active loudspeaker systems 128 dB max. SPL
DSP presets for DYNACORD fullrange speakers
2 x 1000 W RMS Class-D Amplifier
Line In, Line Thru, TOP out, SUB out, DSP out for delay lines, front fills
Integrated Graphic EQ and signal generator
24 bit one-into-three DSP controller

The PSD 215 are high‑performance powered subwoofers designed to simplify creating active 2‑way systems. They use an integrated 2‑channel digital power amplifier with internal 24‑bit 1‑in‑3 DSP controller to optimize the sound quality and protect the subwoofer and full range system used with it. Examples for such systems are combinations of PSD subwoofers with full‑range D‑Lite, Corus and VariLine and the new TS 400 array cabinet.

The DYNACORD PSD 215 is equipped with an integrated two-channel Class D power amplifier (2 x 1000 watts RMS into 4 ohms) and 24-bit one-into-three DSP controller with 48-bit double precision internal resolution, eliminating the need for external controllers and power amplifiers.
The PSD 215 is equipped with a 15“ Electro-Voice DVX3159 woofer specially developed for use in compact subwoofers. It sets a new standard for minimum size and maximum acoustic output while maintaining impressive deep bass high sound pressure levels.
The DYNACORD PSE 215 is the passive versions of the PSD sub sharing the same dimensions, transducer configuration, and acoustic characteristics as the PSD 215.

Cabinet Powered Subwoofer – 1 x 15″ vented design
Maximum Amplifier Output Capability – 3200 W
Amplifier Power RMS – 2 x 1000 W
Amplifier Output TOP SPEAKER – 1000 W @ 4 Ω
Amplifier Output EXTERNAL SUB – 500 W @ 8 Ω
Output Stage Topology, amplifier – Class D
Signal/Noise-Ratio power amplifier, A-weighted – 101 dB
DIM 30 power amplifier, 3.15 kHz, 15 kHz – < 0.05%
IMD-SMPTE power amplifier, 60 Hz, 7 kHz – < 0.15%
Max. SPL 1 m / calc. – 128 dB
Frequency Range (-10 dB) – 40 Hz to X-Over
Input Level – +8 dBu
Input Impedance – 20 ㏀
Presets – 20 factory presets, 5 user memories
Display – 128 x 64 pixels, OLED
Sub Transducer – DVX-3159A
Power Requirement – 100 to 240 V AC, 50 to 60 Hz, 5.2 to 2.7 A
Operating Temperature Range – 0 °C to 40 °C
Amplifier – Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF
Switching Mode Power Supply – Inrush Current Limiters, Mains Over/ Undervoltage, Mains Overcurrent, High Temperature
Dimensions (W x H x D) – 640 mm x 465 mm x 694 mm
Net Weight – 39.6 kg
Shipping Weight – 43.6kg
Enclosure material – 15 mm Multi-ply wood
Finish – Black, scratch-proof
Grille – Steel, black finish
Wheels – 4
Handles – 2
Thread plate for distance piece – M20