Aktivni subfoofer 18″ sa pojačalom za 2-way sistem, 2 x1000 W RMS Class-D pojačalo , 24‑bit 1‑in‑3 DSP controller
3,550.00€
18“ Powered Subwoofer
130 dB max. SPL
2 x 1000 W RMS Class-D Amplifier
24 bit one-into-three DSP controller
DSP presets for DYNACORD fullrange speakers
Line In, Line Thru, TOP out, SUB out
DSP out for delay lines, front fills,…
Integrated Graphic EQ and signal generator
The Dynacord PSD 218 is equipped with an integrated two-channel Class D power amplifier (2 x 1000 watts RMS into 4 ohms) and 24 bit one-into-three DSP controller with 48 bit double precision internal resolution, eliminating the need for external controllers and power amplifiers.
The PSD 218 with an 18“ Electro-Voice DVX3180 long-excursion woofer delivers the performance demanded of 18“ subwoofers in professional concert sound applications. It produces extended low frequency response from a compact enclosure with plenty of punch.
The Dynacord PSE 218 is the passive versions of the PSD sub sharing the same dimensions, transducer configuration, and acoustic characteristics as the PSD 218.
Cabinet Powered Subwoofer 1 x 18“ vented design
Maximum Amplifier Output Capability 3200 W
Amplifier Power RMS 2 x 1000 W
Amplifier Output TOP SPEAKER 1000 W @ 4 Ohm
Amplifier Output EXTERNAL SUB 500 W @ 8 Ohm
Output Stage Topology, amplifier Class D
Signal/Noise-Ratio power amplifier, A-weighted 101 dB
DIM 30 power amplifier, 3.15 kHz, 15 kHz < 0.05%
IMD-SMPTE power amplifier, 60 Hz, 7 kHz < 0.15%
Max. SPL 1 m / calc. 130 dB
Frequency Range (-10 dB) 34 Hz to X-Over
Input Level +8 dBu
Input Impedance 20 kOhm
Presets 20 factory presets, 5 user memories
Display 128 x 64 pixels, OLED
Sub Transducer DVX-3180A
Power Requirement 100 to 240 V AC, 50 to 60 Hz, 5.2 to 2.7 A
Operating Temperature Range 0 °C to 40 °C
Protection Amplifier Audio Limiters, High Temperature, DC,
HF, Short Circuit, Peak Current
Limiters, Turn-on Delay, Back EMF
Switching Mode Power Supply Inrush Current Limiters, Mains Over/
Undervoltage, Mains Overcurrent, High
Temperature
Dimensions (W x H x D) 759 mm x 575 mm x 694 mm
Net Weight 47.8 kg
Shipping Weight 53.8 kg
Enclosure material 15 mm Multi-ply wood
Finish Black, scratch-proof
Grille Steel, black finish
Wheels 4
Handles 2
Thread plate for distance piece M20
18“ Powered Subwoofer
130 dB max. SPL
2 x 1000 W RMS Class-D Amplifier
24 bit one-into-three DSP controller
DSP presets for DYNACORD fullrange speakers
Line In, Line Thru, TOP out, SUB out
DSP out for delay lines, front fills,…
Integrated Graphic EQ and signal generator
The Dynacord PSD 218 is equipped with an integrated two-channel Class D power amplifier (2 x 1000 watts RMS into 4 ohms) and 24 bit one-into-three DSP controller with 48 bit double precision internal resolution, eliminating the need for external controllers and power amplifiers.
The PSD 218 with an 18“ Electro-Voice DVX3180 long-excursion woofer delivers the performance demanded of 18“ subwoofers in professional concert sound applications. It produces extended low frequency response from a compact enclosure with plenty of punch.
The Dynacord PSE 218 is the passive versions of the PSD sub sharing the same dimensions, transducer configuration, and acoustic characteristics as the PSD 218.
Cabinet Powered Subwoofer 1 x 18“ vented design
Maximum Amplifier Output Capability 3200 W
Amplifier Power RMS 2 x 1000 W
Amplifier Output TOP SPEAKER 1000 W @ 4 Ohm
Amplifier Output EXTERNAL SUB 500 W @ 8 Ohm
Output Stage Topology, amplifier Class D
Signal/Noise-Ratio power amplifier, A-weighted 101 dB
DIM 30 power amplifier, 3.15 kHz, 15 kHz < 0.05%
IMD-SMPTE power amplifier, 60 Hz, 7 kHz < 0.15%
Max. SPL 1 m / calc. 130 dB
Frequency Range (-10 dB) 34 Hz to X-Over
Input Level +8 dBu
Input Impedance 20 kOhm
Presets 20 factory presets, 5 user memories
Display 128 x 64 pixels, OLED
Sub Transducer DVX-3180A
Power Requirement 100 to 240 V AC, 50 to 60 Hz, 5.2 to 2.7 A
Operating Temperature Range 0 °C to 40 °C
Protection Amplifier Audio Limiters, High Temperature, DC,
HF, Short Circuit, Peak Current
Limiters, Turn-on Delay, Back EMF
Switching Mode Power Supply Inrush Current Limiters, Mains Over/
Undervoltage, Mains Overcurrent, High
Temperature
Dimensions (W x H x D) 759 mm x 575 mm x 694 mm
Net Weight 47.8 kg
Shipping Weight 53.8 kg
Enclosure material 15 mm Multi-ply wood
Finish Black, scratch-proof
Grille Steel, black finish
Wheels 4
Handles 2
Thread plate for distance piece M20
Data Sheet :
Manual :
PSD_215/218 Owner’s Manual (EN)
PSD_215/218 Bedienungsanleitung (DE)
Certification/Regulatory :
