/

/

/

/

/

Electro-Voice CPS 4.5

Electro-Voice CPS 4.5

audio-pojacavac-electro-voice-cps-45_slika-1

audio-pojacavac-electro-voice-cps-45_slika-2

audio-pojacavac-electro-voice-cps-45_slika-1

audio-pojacavac-electro-voice-cps-45_slika-2

Electro-Voice CPS 4.5

Multikanalni Audio pojačavač snage 4 x 500W na 4ohm
Namenjen fiksnim instalacijama, mogućnost rada na 100V/70V i kontrole računarom (IRIS Net softver)

- IRIS-Net izbor impedanse svakog kanala (2-10 Oma u koracima od 0,1 Oma)

- Preklopni 50 Hz visokopropusni filter (Hi-Z režim)

- Kompletna zaštita: termička, preopterećenja, kratki spojevi, HF, DC, povratni EMF, udarna struja

2,600.00€

-Four channels in one compact rack-efficient unit
-500 W per channel
-70/100 V operation for distributed systems
-Class-D design for optimum efficiency
-Slot for optional RCM-810 module, allowing IRIS-Net control and monitoring
-IRIS-Net selection of each channel’s impedance (2-10 Ω in 0.1 Ω steps)
-Rear-mounted attenuators
-Switchable 50 Hz high-pass filter (Hi-Z mode)
-Complete protection: thermal, overload, shorts, HF, DC, back-EMF, inrush current
-Phoenix-type input and output connections
-Remote power-on/off contact
-Programmable power-on delay settings
-Front-to-rear fans

Weight – Net 11.1kg (24.47 lbs)
Depth – 421.5mm (16.59″)
Width – 482.6mm (19″)
Height – 88.1mm (3.47″)
Frequency Response (-3 dB) – 15 Hz-30 kHz
Maximum Bridged Output 8Ω – 1000Watts
Mains Voltage – 220 – 240 V, 50 – 60 Hz or 120 V, 50 – 60 Hz, 50 – 60 Hz
Maximum Bridged Output 4Ω – 1000Watts
CAN Bus Interface – Optional (RCM-810 card)
Total Harmonic Distortion – 0.05%
Cooling – Front-to-Rear, continuously variable fans
Slew Rate – 28V/µs
Audio Network – No
Intermodulation Distortion (SMPTE) – 0.05%
Variable Load Drive (VLD) – Yes
DIM 30 – 0.02%
Topology – Class-D
Signal-to-Noise Ratio (A-weighted) – 100dB
Impedance – 2/4/8/8 VLD/70 V/100VΩ
Input Impedance – (Balanced) 20kΩ
Input Sensitivity 0 dBu (.775V)-2ω, +3 dBu (1.1V)-4/8ω, +6 dBu (1.55) 70V/100V
Network Control (IRIS-Net) – Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 4Ω – 500Watts
Amplifier Gain – 32 dB (Lo-Z), 33 dB (70V), 36dB ((100V))
Continuous Rated Power (1 kHz, THD 1%) 100v – 500Watts
Continuous Rated Power (1 kHz, THD 1%) 70v -500Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω – 450Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 100v – 450Watts
Electronics Type Amplifier
Continuous Rated Power (20-20 kHz, THD<0,2%) 70v – 450Watts
Continuous Rated Power (1 kHz, THD 1%) 2Ω – 500Watts
Analog Inputs – 4, electronically balanced, Phoenix-type
Continuous Rated Power (1 kHz, THD 1%) 8Ω – 250Watts
Maximum Input Voltage – +22 (9.76 Vrms)
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω – 225Watts

SERIJA: Electro-Voice CPS

BROJ KANALA: 4

BROJ ZONA: 1

KLASA POJACAVACA: D

ULAZNI SIGNAL KONEKTORI: Feniks

Izlazna snaga na 100V: 450 W

OGRANICENJE SNAGE PO KANALU: 450 W

Snaga po kanalu na 4 Ω (Single Channel): 500 W

Snaga po kanalu na 8 Ω (Single Channel): 250 W

Snaga po kanalu 4 Ω (Bridge): 1000 W

Snaga po kanalu 8 Ω (Bridge): 1000 W

RACK UNITS: 2 U

NAPAJANJE: 220 - 240 V, 50 - 60 Hz

VISINA (H): 88.1 mm

SIRINA (W): 482.6 mm

DUBINA (D): 421.5 mm

NETO TEZINA: 11.1 Kg

SERIJA: Electro-Voice CPS

BROJ KANALA: 4

BROJ ZONA: 1

KLASA POJACAVACA: D

ULAZNI SIGNAL KONEKTORI: Feniks

Izlazna snaga na 100V: 450 W

OGRANICENJE SNAGE PO KANALU: 450 W

Snaga po kanalu na 4 Ω (Single Channel): 500 W

Snaga po kanalu na 8 Ω (Single Channel): 250 W

Snaga po kanalu 4 Ω (Bridge): 1000 W

Snaga po kanalu 8 Ω (Bridge): 1000 W

RACK UNITS: 2 U

NAPAJANJE: 220 - 240 V, 50 - 60 Hz

VISINA (H): 88.1 mm

SIRINA (W): 482.6 mm

DUBINA (D): 421.5 mm

NETO TEZINA: 11.1 Kg

-Four channels in one compact rack-efficient unit
-500 W per channel
-70/100 V operation for distributed systems
-Class-D design for optimum efficiency
-Slot for optional RCM-810 module, allowing IRIS-Net control and monitoring
-IRIS-Net selection of each channel’s impedance (2-10 Ω in 0.1 Ω steps)
-Rear-mounted attenuators
-Switchable 50 Hz high-pass filter (Hi-Z mode)
-Complete protection: thermal, overload, shorts, HF, DC, back-EMF, inrush current
-Phoenix-type input and output connections
-Remote power-on/off contact
-Programmable power-on delay settings
-Front-to-rear fans

Weight – Net 11.1kg (24.47 lbs)
Depth – 421.5mm (16.59″)
Width – 482.6mm (19″)
Height – 88.1mm (3.47″)
Frequency Response (-3 dB) – 15 Hz-30 kHz
Maximum Bridged Output 8Ω – 1000Watts
Mains Voltage – 220 – 240 V, 50 – 60 Hz or 120 V, 50 – 60 Hz, 50 – 60 Hz
Maximum Bridged Output 4Ω – 1000Watts
CAN Bus Interface – Optional (RCM-810 card)
Total Harmonic Distortion – 0.05%
Cooling – Front-to-Rear, continuously variable fans
Slew Rate – 28V/µs
Audio Network – No
Intermodulation Distortion (SMPTE) – 0.05%
Variable Load Drive (VLD) – Yes
DIM 30 – 0.02%
Topology – Class-D
Signal-to-Noise Ratio (A-weighted) – 100dB
Impedance – 2/4/8/8 VLD/70 V/100VΩ
Input Impedance – (Balanced) 20kΩ
Input Sensitivity 0 dBu (.775V)-2ω, +3 dBu (1.1V)-4/8ω, +6 dBu (1.55) 70V/100V
Network Control (IRIS-Net) – Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 4Ω – 500Watts
Amplifier Gain – 32 dB (Lo-Z), 33 dB (70V), 36dB ((100V))
Continuous Rated Power (1 kHz, THD 1%) 100v – 500Watts
Continuous Rated Power (1 kHz, THD 1%) 70v -500Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω – 450Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 100v – 450Watts
Electronics Type Amplifier
Continuous Rated Power (20-20 kHz, THD<0,2%) 70v – 450Watts
Continuous Rated Power (1 kHz, THD 1%) 2Ω – 500Watts
Analog Inputs – 4, electronically balanced, Phoenix-type
Continuous Rated Power (1 kHz, THD 1%) 8Ω – 250Watts
Maximum Input Voltage – +22 (9.76 Vrms)
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω – 225Watts

Data Sheet

CPS4.5 Engineering Data Sheet
en

Manual

CPS4.5, CPS4.10, CPS8.5 Owners’ Manual
en

Certification/Regulatory

CPS4.5 Declaration of Conformity
en