/
/
/
/
/
Electro-Voice TX 1122

Electro-Voice TX 1122

Electro-Voice TX 1122

Pasivna dvosistemska zvucna kutija 12″ 500W

- Zvuk visokog kvaliteta na visokim nivoima
- SMX2120 vufer sa potpuno simetričnim pogonom , 1,25-inčni DH3/2010A titanijumski HF kompresijski drajver
- Osetljivost 97 dB, maksimalni SPL 130 dB

900.00

▪ DH3 1.25 inch (32 mm) Diaphragm, 1 inch (25 mm) Exit Pure Titanium Compression Driver
▪ SMX2120 12 inch (305 mm) LF Transducer with Fully Symmetric Drive
▪ 97 dB Sensitivity, 130 dB Maximum SPL
▪ 500 W Continuous (2000 W Peak) Power Handling
▪ Six (6) M10 Threaded Points for Suspension

The TX1122 from Electro-Voice a high power, 2-way loudspeaker system that can be used in a variety of applications where high quality sound reinforcement is required in a lightweight package.
The TX1122 utilizes the DH3, a high output 1.25 inch titanium compression driver, coupled to a Constant Directivity 90° x 50° horn.
This combination results in a smooth response to 20 kHz and excellent pattern control in short to medium throw applications.
The SMX2120 12 inch woofer has an FEA optimized magnet structure for very low distortion and maximum intelligibility at high SPL levels.
The crossover uses steep 24 dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long term reliability.
The TX1122 has a variety of features that make it equally suited for portable or fixed installation applications. The trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength while still remaining lightweight.
The unique grille design is very strong, dent resistant, and features a rotatable logo. Four way handles allow for gripping the TX1122 in a variety of positions, a pole mount allows for placement on a subwoofer or a tripod. Six (6) M10 threaded points allow a single TX1122 to be suspended in a various positions.
The recessed input panel with dual NL4 connectors keeps the connectors hidden while allowing the TX1122 to be used with the TX1181 subwoofer for extended sub bass on a single amplifier channel, with no additional processing needed.

Specifikacija
SERIJA: Electro-Voice - Tour X
FREKVENTNI OPSEG (-3 dB): 70 - 20000 Hz
FREKVENTNI OPSEG (-10 dB): 45 - 20000 Hz
IMPEDANSA: 8 Ohm
Maksimalni SPL: 132 dB
OSETLJIVOST: 97 dB
Kontinuirana snaga (RMS): 500 W
Vrsna snaga (Peak): 2000 W
Pokrivanje (H° x V°): 90 x 50
Niskotonac (bas): 12"
Visokotonac (high): 1.25 "
CROSSOVER: 1600 Hz
TIP KONEKTORA: NL 4
MATERIJAL KUTIJE: Plywood
BOJA: Crna
VISINA (H): 440 mm
SIRINA (W): 364 mm
DUBINA (D): 573 mm
NETO TEZINA: 19.8 Kg
Opis proizvoda

▪ DH3 1.25 inch (32 mm) Diaphragm, 1 inch (25 mm) Exit Pure Titanium Compression Driver
▪ SMX2120 12 inch (305 mm) LF Transducer with Fully Symmetric Drive
▪ 97 dB Sensitivity, 130 dB Maximum SPL
▪ 500 W Continuous (2000 W Peak) Power Handling
▪ Six (6) M10 Threaded Points for Suspension

The TX1122 from Electro-Voice a high power, 2-way loudspeaker system that can be used in a variety of applications where high quality sound reinforcement is required in a lightweight package.
The TX1122 utilizes the DH3, a high output 1.25 inch titanium compression driver, coupled to a Constant Directivity 90° x 50° horn.
This combination results in a smooth response to 20 kHz and excellent pattern control in short to medium throw applications.
The SMX2120 12 inch woofer has an FEA optimized magnet structure for very low distortion and maximum intelligibility at high SPL levels.
The crossover uses steep 24 dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long term reliability.
The TX1122 has a variety of features that make it equally suited for portable or fixed installation applications. The trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength while still remaining lightweight.
The unique grille design is very strong, dent resistant, and features a rotatable logo. Four way handles allow for gripping the TX1122 in a variety of positions, a pole mount allows for placement on a subwoofer or a tripod. Six (6) M10 threaded points allow a single TX1122 to be suspended in a various positions.
The recessed input panel with dual NL4 connectors keeps the connectors hidden while allowing the TX1122 to be used with the TX1181 subwoofer for extended sub bass on a single amplifier channel, with no additional processing needed.